lucky45

Your reply was very good thanks again

I am not shure, my friend but what are you trying to make,Im not shure Merged post follows: Consecutive posts mergedMy dear friend, Im not trying to make chlorine at all. The chlorine that Im making is a byproduct that occurs in the process of making Potassium Perchlorate, An extremley powerfull Oxidizer. Potassium Perchlorate is a type of salt that is not mined, it has to be made. There are other natural occuring Oxidizers Like Potassium Nitrate (BAT SHIT) but KCLO4 has to be synthisised. To my up to date knowledge,

As we approach the speed of light and beyond, Wouldnt Light start to gain physical mass as we know,And if so wouldn;t we have to chart a course so we wouldn;t colided with light?

Thanks for the reply, I think it was an interesting subject. Ok, My question is: Is is possible for anything to escapt the earth into the vacuum of space without some type of force behind it? Also wont all things even the lightest of gassess be pulled back into our atmosphere buy our own gravity.

Listen Im not an expert in this field, But I would say Mass and energy. Doesant all mass have potential energy, and doesnt something that gives of energy have mass that will produce it ,I would say mass.

I dont use a coffee can or anything like that. I use an acrilic jar for my cell body. I also use Titanium for my cathode, however ( you can use a high grade of SSteel. Kitchen or hospital grade) not that real shiny SS you see everywhere. Also The currant I use is 5-6 volt -4-15 amps. The higher the amps the faster you make perchlorate, but you must use a water bath with anything over 6 amps. also My cell is sealed and I vent to outside. If you make KCLO4 from KCL. you will get chlorine gas. Lastly I get my raw product and let dry on top of my oil burner or coal stove. Then I mill it in a mortar and pestal to consistency of baybe powder. the I put in a glass pie pan and hold a heat gun over it,stiring constantly untill it flows like flour. Anymore questions please post me.. (forgot to say that there are very few metals that you can use for an anode. The best is Platinum,- next is lead dioxide, and also MMO metals will work. Tell me what are you using for a power source?

I aggree chlorine is nasty stuff. The chlorine that I make is a byproduct from Electrolizing Potassium chloride. Clorine is produced at the anode and hydrogen gas is produced at the cathode. I have a full face gas mask with 2 NIOSh approved filters, that cost me $300.00. On top of that I have a fumehood. When I boil Hydrochloric acid, chlorine,and KCLO3, I get chlorine dioxide. Trust me I take no chances. (NO ONE SHOULD EVER ATTEMP THIS PROCEDURE UNLESS YOU HAVE EXPERIANCE IN THIS FIELD) Not only are these gasess TOXIC, but very flammeble

You first have to apply for a BATF licence and once you obtain one ( you will have to pass an extensive background check) From there Im not shure. Why are you looking into this area of disscussion? Merged post follows: Consecutive posts mergedWhy is your interest in pyrotecnics, Please respond. I am in the same field as you.

I use a resperator with my science projects, You want to get a resperator that is NIOSH approved Merged post follows: Consecutive posts mergedA NIOSH approved filter will do the job. What kind of project are you working on?

Yes its hard o buy (con-sulfuric acid) I mean with a 95% purity. You can only buy it if you know someone that has a catogory 24 licence in swimming pool maintenace and and a catogory 7 licence for lawn and turf management. Con-sulfuric acid has no oder,and does not fume and has the tecture of olive oil. And should (NEVER COME IN CONTACT WITH KCLO3) To those who do not have experiance in this area!

I didnt say my method was the best way to clean flesh from bones. it isnt. but for a beginner it will work. At least my deer skulls are still intact If you really want to clean up flesh from a bone whatever, I would Highly suggest leave your trophy outside and let nature take its course.

What I use to do for my deer heads was to get a big bucket, fill with water and add a couple of cans of draino and let it work overnight, You might have to repeat this process a few times, but it does work. (DO THIS OUTSIDE!!! fumes are harmfull /Once clean, give your tropyhy a bath in sodium hypochlorite for a couple of hours. This will whiten up your product. Finally to preserve leave outside so oxygen will get at it Your trophy is now done. Leaving outside will not hurt, bones have been out in the elements for centuries. with now continued deterioration.

If you go online try the labdepot they have everything

Iv been doing electrolysis for over 2 yrs, It is alot of fun and fairly safe if using LOW CURRANT! (DC). This goes back about 4000 yrs (I THINK, DONT QUOTE ME) when a simple battery was made

I know mooepoo, I cant help that Im a sceptic. We are all learning here, and if we didnt have the gift of :what if: then science,astronomy,and chemistry, We would have nothing to look forward to except reputition of what we have learned up till know.We all need to seek out the unknown,and try with our puny minds to make sence of it. And se if we can;t better ourselves in the process.

I agree with you 100%. Its folkloore. just remember that the lock is about 950 feet at its deepest.Who the hell knows what is lurking down there. I know that there is no absolute evedince concerning this folkloore,but I think we have to keep an open mind ,along with other mysteries of our planet, Unless there is absolute proof beyond a reasonable doubt,there will always be that bit of uncertantly: not just this but anything else that makes us say;I wonder if;

All I can say about me stateing the obveious, and my subject is pointless Dont read any more of my posts If you find me lacking anykind of intelligent input. I dont want to waste your time.

The one thing about this mystery is that 99.999% concerning this is folk loore. But there is that 1% of uncertainty Thats what makes a good mystery.And stirs the mind alittle bit

I have a good deal of Knowledge with KCLO3.and KCLO4/ Potassium chlorate is a very strong Oxidizer, so is Potassium perchlorate. The thing with KCLO3 is that if you mix sulfer!! or any kind of organic property with it ,it becomes VERY UNSTABLE. I HIGHLY!! recomend if you want to do any science experancees with KCLO3. you should use KCLO4 instead of KCLO3. because it is alot more stable than KCLO3. Please take me seriously!! I konw what Im talking about.

We all know about the lock ness monster. Well I think it is a bunch of Bull S-- However The only thing I can come up with is It might be a Large Sturgeeon. I say this because I caught one about 4 foot long in the St. lawrance Seeway back in 1995,> It is a bottom feeder, and they look like a Carp, Sucker,A Taranasouras, and a Crocidile all in one. Other than that, Its folk loor. What do you think?

Im sorry mooeypoo, Your right. Your the only one I met so far that has a little bit of curtisy to me, Sometimes I think that everyone here is trying to be better than than me, The bottom line is that No one here is better that the next person. Your friend lucky

Who Came up with the idea that The great pyramids have power? For example Can you really put an edge on a razor blade if centered inside a pyramid

Well, any replies?? What do you think, Can science prove that we were not planted here by aliens?

Did mankind come to be from the evolution of some ameba or some single celled organisim that came together at the beginning of our planet? Or were we put here by some super intelligence from another planet? And just maybe these aliens are keeping watch over us! Who can say, Maybe all of the UFO reportings might have some truth to them.

No Problem but I only responded to a question Thankyou