franco malgarini Posted September 3, 2018 Share Posted September 3, 2018 It' s possible? Link to comment Share on other sites More sharing options...
John Cuthber Posted September 3, 2018 Share Posted September 3, 2018 Something like this?https://en.wikipedia.org/wiki/Birkeland–Eyde_process Link to comment Share on other sites More sharing options...
franco malgarini Posted September 3, 2018 Author Share Posted September 3, 2018 Also this; can function? Link to comment Share on other sites More sharing options...
John Cuthber Posted September 3, 2018 Share Posted September 3, 2018 (edited) My Italian/ Spanish/ whatever is poor to non existent, but you seem to be trying to separate the nitrogen and the oxygen. Why bother? Edited September 3, 2018 by John Cuthber Link to comment Share on other sites More sharing options...
franco malgarini Posted September 3, 2018 Author Share Posted September 3, 2018 The air is 78% nitrogen and 21% oxygen: we can separate them electomagnetically... with two coils, one clockwise and other anticlockwise Link to comment Share on other sites More sharing options...
chenbeier Posted September 3, 2018 Share Posted September 3, 2018 (edited) I dont think so you can separate oxygen and nitrogen by an magetic field. Because the magnetic field will not have any influence on the molecules. Magnetic field has only influence on ferromagnetic material like, iron , nickel, cobalt, gadolinium, samarium and some special alloys. Edited September 3, 2018 by chenbeier Link to comment Share on other sites More sharing options...
John Cuthber Posted September 3, 2018 Share Posted September 3, 2018 Oxygen is weakly magnetic. You could separate them but it would take a very powerful magnet. Why would you want to? Link to comment Share on other sites More sharing options...
Sensei Posted September 3, 2018 Share Posted September 3, 2018 (edited) 10 minutes ago, chenbeier said: Magnetic field has only influence on ferromagnetic material like, iron , nickel, cobalt, gadolinium, samarium and some special alloys. That's not entirely true. Magnetic field has effect on ions. Thus there is Lorentz's force: https://en.wikipedia.org/wiki/Lorentz_force It's used to separate isotopes with different masses and elements with different charges, in mass-spectrometry. Edited September 3, 2018 by Sensei Link to comment Share on other sites More sharing options...
chenbeier Posted September 3, 2018 Share Posted September 3, 2018 (edited) 5 minutes ago, Sensei said: That's not entirely true. Magnetic field has effect on ions. Thus there is Lorentz's force: https://en.wikipedia.org/wiki/Lorentz_force But here it is not the case, here it was talking about to seperate Oxygen from nitrogen in the air by using a magnet. Even maybe oxygen will be influenced, how big should the magnet be? Later it should get nitric acid. This is total nonsense. Sorry to say that. Edited September 3, 2018 by chenbeier Link to comment Share on other sites More sharing options...
franco malgarini Posted September 3, 2018 Author Share Posted September 3, 2018 3) Electromagnetic separation. The molecules of a gas can be ionized (that is, their electrical charge can be given) if they are exposed to an electric charge. Such ionized molecules can be accelerated through another electric field and, by passing them through appropriate slots, it is possible to control the direction of movement. If this "jet" of ionized molecules passes through a magnetic field, its trajectory is bent to take a circular shape. The initial velocity imparted to the molecules is the same for all and the magnetic field exerts the same force on all the molecules. But if some of these are heavier, they will have more momentum and will be diverted less easily. Thus their trajectory will have greater radius than that of the lighter molecules, and therefore heavy molecules and light molecules will hit different targets and can be separated. This principle had already been used for many years, on laboratory scales, in the mass spectrometer. Link to comment Share on other sites More sharing options...
chenbeier Posted September 3, 2018 Share Posted September 3, 2018 But this is for low scale not for a commercial production of nitric acid. ,Now using also electrical fields not only magnetic ones. But it ended up by the already mentioned Birkeland-Eyde process. By using high current sparks to ionize the nitrogen to get it burned by oxygen. Link to comment Share on other sites More sharing options...
franco malgarini Posted September 3, 2018 Author Share Posted September 3, 2018 The conical coil then make the reunion of N2 and O2 into NO2, at right frequency... Link to comment Share on other sites More sharing options...
chenbeier Posted September 3, 2018 Share Posted September 3, 2018 (edited) Build a device and try it. But I dont beleave, it will work. If it would work it would already be invenrted. Edited September 3, 2018 by chenbeier Link to comment Share on other sites More sharing options...
John Cuthber Posted September 3, 2018 Share Posted September 3, 2018 They dohttps://www.researchgate.net/publication/289333698_Magnetic_separation_of_oxygen_from_air If you want nitric acid, why would you want to separate the gases? They need to be together to react. Link to comment Share on other sites More sharing options...
franco malgarini Posted September 5, 2018 Author Share Posted September 5, 2018 Wonderfol, John It' s all simplest Link to comment Share on other sites More sharing options...
StringJunky Posted September 5, 2018 Share Posted September 5, 2018 "Imbuto con bobina" is funnel with coil. Link to comment Share on other sites More sharing options...
chenbeier Posted September 5, 2018 Share Posted September 5, 2018 What should this device do. In the drawing the air goes through a pipe into water. The coil is outside the funnel. What is the light blue colour, also air? Link to comment Share on other sites More sharing options...
franco malgarini Posted September 5, 2018 Author Share Posted September 5, 2018 Definitive, two stages, at few money -1 Link to comment Share on other sites More sharing options...
chenbeier Posted September 5, 2018 Share Posted September 5, 2018 (edited) Hahaha, funny picture. I am wondering how looks like your high power frequency coil. Edited September 5, 2018 by chenbeier Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now