nimrodess Posted August 4, 2005 Posted August 4, 2005 Ok, this may sound like a strange question but how hot does a 40watt bulb get on the glass part of the bulb. I am needing to know what the maximum temperature would be. Guesses are welcome too as I have no idea.
YT2095 Posted August 4, 2005 Posted August 4, 2005 impossible to determine without other factors being taken into consideration.
NeonBlack Posted August 4, 2005 Posted August 4, 2005 I remember when I was young I tried this "experiment" I held an outdoor thermometer up to a bulb in a lamp and ended up with broken glass all over.
some nerd Posted August 4, 2005 Posted August 4, 2005 It will be pretty hot if it is incandescent (I cant give number though) but if it Fluroescent bulb then may be just room temp..
5614 Posted August 5, 2005 Posted August 5, 2005 A big factor will be how long the light has been on for, it starts off at room temp! Also stuff like is it enclosed in a box or in the open so heat can disperse quicker.
YT2095 Posted August 5, 2005 Posted August 5, 2005 and how far is the glass from the heating fillament and what gas is used inside, all these things are critical for a correct answer. anyway, why not, as suggested, get a cooks thermometer and test this yourself?
danny8522003 Posted August 5, 2005 Posted August 5, 2005 I held a digital thermometer up to a 40w reflector lamp once and it went above 150 degrees C before i got bored lol.
najib Posted August 5, 2005 Posted August 5, 2005 - use a thermocouple prob (K TYPE) connected to a digital multimeter. - rotate the multimter selector to "temp" position.( you can select either °F or °C ) - put the prob on the bulb and see the display of multimeter rising progressively. - you can draw a "temperature to time" curve.
swansont Posted August 6, 2005 Posted August 6, 2005 Ok, this may sound like a strange question but how hot does a 40watt bulb get on the glass part of the bulb. I am needing to know what the maximum temperature would be. Guesses are welcome too as I have no idea. Here is the equation for radiative heat transfer. Temperature must be in K, and you need the area of the bulb. You'll get the temperature assuming no conduction or convection, which is the max theoretical value.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now