jv1 Posted July 1 Posted July 1 Liquid drop model revisited The liquid drop model explains forces in atomic nucleus as they were created by tiny liquid drops. It is based partially on theory and partially on empirical measurements. In this revisited model The visible universe is seen as bubble/nucleus of liquid with diameter of 8.8x10e26m.In the further text big bubble. The galaxies inside the bubble are seen as a nucleons.In further text small bubbles. For simplicity of calculation we are going to use average size of galaxies. The number of galaxies inside the visible universe is Ng=2x10e12. The mass of galaxies is found to be 10e7 to 10e12 solar mases. Mass of average size of galaxy is calculated to be ma=2 x10e39kg. The sizes of galaxies are in the range of few to 100 kiloparsecs. The size of average galaxy is Da=4.89x10e20 m.We do not know the average "height" of galaxy. The average distance between two galaxies is 1x10e6 light years da=9x10e21m In visible universe there is about 10E80 protons . There is about 7 protons for one neutron in universe. Z=10x 10e79 N=10e80/7=1.4X10e79 A=11.4x10e79 The average galaxy has Za=10x10e79/2x10e12 Za=5x10e67 Na=5x10e67 /7 Na=0.71x10e67 The Aa=5.71x10e67 From formula R=Ro/A1/3 Ro=R/A1/3 Ro=4.4x10e26/(2x10e12)e1/3 Ro=5.5x10e30m Ro= height of galaxy. We already know one size of average galaxy is Da= 4.89x10e20 Foer approximation the volume of average galaxy is Va=Rox Pi x( Da)e2 Va=(4.89x10e20)e2 x3.14x 5.5x10e30 Va=412x10e70 The density od average galaxy is D=ma/Va D=2x10e39/412x10e70 D=0.0048x10e-31 D=48x10e-27kg/m3 The average density of big bubble(visible universe) is very close to average density of dark matter inside the visible uni. The force acting on surface area of big bubble is F=PoxAbb F=246.10e52 x 1.3x10e-13 F=0.316x10e44N The force acting on the outside surface area of big bubble is very similar to Planck's force. Binding energy between two closest average galaxies(small bubbles)can be calculated from Formula for gravitational energy. U=Gx(ma)e2/da U=6.6x10e-11 x (2x10e39)e2 /9x10e21 U=8.8x10e46J There is 1x10e12 pairs of nucleons (small bubbles) creating this energy) Total binding energy of big bubble is Et=8.8x10e46 x 10e12 Et=8.8x10e58J*********** The binding energy calculated by Weizsäcker formula : E=15.75 x A - 17.8 x A e1/3 (Columb and Pauli term are negligible) E= 15.75 x5.71 x 10 e67 - 17.8x(5.71x 10e67)e2/3 E=89.9x10e67-14.7x10e44 E= 89.9x10e67 mev One ev=1.6x10e-13J E=89.9x10e67x 1.6x10e-7 E=142.4x10e60********** The total binding gravitational energie Produced by little bubbles - seen as nuclons is very similar (close) to total energy produces by total number of protons inside the big bubble (weizsaecker formula ). In fractal cosmology is stated that distribution of matter in the universe or structure of universe itself is fractal across wide range of scales. On sub atomic level all terms(volume,surface,columb and pauli) play important contribution to binding energy. On Plancks scale the terms (volume,surface,columb and pauli) can be used to visualize and explain : Volume term: The volume of liquid in the nucleon multiplied by density of liquid is mass.The mass traveling at speed Is what create binding energy. Arae term: At Planck diameter, there is no smaller diameter so there has to be 2 nucleons creating nucleus. One moving and the other stationary , or moving in the opposite direction. Columb term: The spin of stationary and moving nucleon is can be seen as a pitch of a thread, If the spins are opposite and have the same pitch, the nucleons (moving and stationary)will be bound or attracted to each other. If the spins are same or the pitch is different the nucleons are going to repel each other. The spin number 0,1,2,3. Or 1/2,3/2 .... Can be seen as a "pitch" angle of thread(spin) Pauli term: The magic numbers 2,8,20,28,50,82 and 126 are the numbers of stationary and movable nucleons which can be combined to create nucleons in Planck's scale. To fulfil all terms from above the nucleon has to be created by particles with diameter length of Planck. To fulfil Columb term the particle has to be square-cube shaped. The Planck size cube . The big bubble or visible universe should look something like this . Conclusion: The preplanned (or calculated)change of pressure Po acting on outside surface of big bubble will cause harmonized oscillations inside the big bubble which will cause Planck cubes to move in zig zag helix pattern to create forces we actions inside the big bubble. -1
jv1 Posted July 2 Author Posted July 2 Hi swansont I am not reinventing the wheel. Everything in standard mode is accurate to the letter . I just want to point out few overlooks and point out few directions where the standard mode can be better understood. If you connect this and my previous threads this “model “points out few things: 1)the fractal nature of universe 2)the total binding energy between all protons in visible universe is equal to gravitational energy between all galaxies in the visible universe 3)the Planck force - pure theoretical term is equal to force created by pressure Po acting on outside surface of visible universe 4) the average density of visible universe is equal to pure theoreticaly calculated density of dark matter. 5)it connect liquid drop and shell model 6) it explains what happens on Planck scale ,sun atomic scale,atomic scale ,molecule scale All the way to interaction between galaxies. 7)it explains in 3D the spin of particles 8)connection between electromagnetic properties of particles with fluid nature of particles 9)change of pressure Po acting on outside of visible universe create vibration which produces motion of particles inside . 10) fundamental forces have all the same nature - electromagnetic nature . The gravitational force is crated the same way as the other forces- by change in pressure Po acting in the outside of “big bubble”. 11) the smallest particle in universe is Planck sized cube
jv1 Posted July 3 Author Posted July 3 I would like to add couple of more things. The average sized galaxies (small bubbles) inside the visible universe (big bubble) are acting on each other with gravitational force. The surface tension T=F/L F=Fg=0.97x10e25 L=27.63x10e26(half of circumference of big bubble) T=0.0035 Pi-Po=4T/r Po=(1.3x10e-11)-(3x10e-29) The outside pressure Po acting on bubble is very close Pi pressure acting inside of the big bubble. If the proton is made of two zig zag helix loop and loops are made of Plancks size cubes here is very rough picture : To calculate the size of loops for proton the mass and diameter of proton is starting point. The Planck cube mass and diameter are used too. N1 is number of Plancks cube masses inside the proton mass. N2 is number of Planck cubes inside the area of cross section of proton diameter . S=N1/N2 S is length of loop 1 and 2 . S is circumference of loop. The r=4 x10e28m This is very close to 4.4x10e26 m diameter of big bubble. The cross section are of proton Shown as a circle (N2)of Planck cubes (single layer) is area where half of cubes are moving CW with loops 1 and CCW with loop2 .This is main spin . At the same time cubes have zig zag motion they go perpendicular to the main spin and create intrinsic spin. The number of cubes in “vertical “part of zig zag motion will moving at the same time will create pitch- the spin number .Two loops are going to be “pushing “against each other and creating spinning motion - the main spin around proton. The cubes moving perpendicular will create Pauli/ pairing - intrinsic spin. Just one more thing- any change we afflict to proton ,if we alter number of cubes flowing through the proton ,will automatically change number of cubes or flow of cubes on both loops .On both loops at the same time at very big distance - there is nothing “spooky “ about that .
swansont Posted July 3 Posted July 3 ! Moderator Note If you can’t meet the minimum level of what we require from speculations, your threads are going to continue to be shut down. And if you spam us by re-introducing discussion that’s been shut down, you will be banned
Recommended Posts