GreekMan Posted May 15, 2006 Share Posted May 15, 2006 Which would transfer heat to water more efficiently, a glass beaker or an aluminium can? Link to comment Share on other sites More sharing options...
insane_alien Posted May 15, 2006 Share Posted May 15, 2006 aluminium can, glass has a very low heat conductivity and aluminium has a very high heat conductivity. infact aluminium has such a good conductivity that it is used in heatsinks for cpu's and other electronic devices. copper is better and is used in industrial and high end heat sinks then silver which is the best(IIRC) which is rarely used in heatsinks due to the high cost. glass on the other hand is a poor conductor of heat, it is actually an insulator. Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 the Alu can, without a doubt. IIRC the absolute Best would actualy be Silver (Ag), in both Thremal and electrical conductivity (they also generaly tend to share this trait, that if they conduct electricity well, the same will apply to heat). Link to comment Share on other sites More sharing options...
encipher Posted May 15, 2006 Share Posted May 15, 2006 I thought gold was? I know they use it in real expensive cars and audio equiptment because its pretty much the best ? Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 actualy gold comes a little furter down the list, and more often that not its actualy Paladium that used instead. Gold has better anti oxidising characteristics, that`s all, and paladium Looks like gold and works just as well and can demand Gold Type prices from the market that thinks all this stuff makes a Difference. Link to comment Share on other sites More sharing options...
insane_alien Posted May 15, 2006 Share Posted May 15, 2006 gold is used because its good at shielding from electromagnetic noise from other electronic gadgets like hoovers, and electric motors (and the coils in combustion engines). there are better things than gold for heat conduction and electrical conduction. Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 gold is used because its good at shielding from electromagnetic noise from other electronic gadgets like hoovers, and electric motors (and the coils in combustion engines). you ARE kiding right? Link to comment Share on other sites More sharing options...
insane_alien Posted May 15, 2006 Share Posted May 15, 2006 am i? i heard gold was good at shielding signals from external electromagnetic interference. but this is off topic and nothing to do with heat transfer. Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 no, it`s nothing to do with shielding, that`s just a marketing idea that folks buy into (literaly), Gold is used in Contacts as a way of ensurin a good connection that won`t oxidise easily over time, that`s all. and I I said that which may LOOK like Gold on earphone jacks etc... is actualy Paladium metal. in Order it`s: Silver(Ag), Copper(cu), Gold(Au), Aluminium(Al). and glass isn`t all THAT "Bad" of a heat conductor either, it`s a perfectly Ionic bond and will conduct electricity excellently when molten also Link to comment Share on other sites More sharing options...
swansont Posted May 15, 2006 Share Posted May 15, 2006 Having recently dealt with the issue, I can tell you that if you want to shield against 50-60 Hz, foil isn't going to do it. The skin depth (1/e attenuation) for copper is 8.5 mm at 60 Hz. Gold and silver would likely be similar. (some contractors at work wanted to put 480V 225A power lines right next to our data conduits, and assured us that the concrete encasement would shield them. Concrete is not as good as copper by a large margin) Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 wouldn`t a soft iron condiut have been better? that can be made as a "baffle" like in a muffler/exhaust pipe and totaly loose the 60hz to heat energy entirely! Link to comment Share on other sites More sharing options...
swansont Posted May 15, 2006 Share Posted May 15, 2006 wouldn`t a soft iron condiut have been better?that can be made as a "baffle" like in a muffler/exhaust pipe and totaly loose the 60hz to heat energy entirely! Yes, because it has a high permeability. But the construction specs called for concrete, though they were free to pack it with rebar. They also called for ~5m separation from the data conduits, so we had them move the power line further away. Link to comment Share on other sites More sharing options...
YT2095 Posted May 15, 2006 Share Posted May 15, 2006 well reinforcement bar/mesh won`t be a whole hell of alot of good unless they hope for some sort of mega slack-a$$ farraday cage affair! Oh Dear )) Link to comment Share on other sites More sharing options...
Prime-Evil Posted May 16, 2006 Share Posted May 16, 2006 Which would transfer heat to water more efficiently, a glass beaker or an aluminium can?Perhaps this was a trick question. Under certain conditions, like direct sunlight, the glass beaker will allow more heat to be transfered by radiation. In the case of a bunsen burner my money would be on the aluminum can, but under certain conditions, like if the flame was on the side instead of underneath, the glass beaker might win again. Depends on a lot of factors, including the temperature of the water, and the temperature and pressure of the air, assuming there is air. Link to comment Share on other sites More sharing options...
Primarygun Posted May 16, 2006 Share Posted May 16, 2006 I can't believe that diamond can transfer heat much faster than others, though I know it is a good heat conductor. and at temperature, gold is a little bit better than aluminium Link to comment Share on other sites More sharing options...
jdurg Posted May 16, 2006 Share Posted May 16, 2006 Actually YT, palladium looks NOTHING like gold. Palladium is a bright, silvery metal while gold is a nice yellow (golden) color. Palladium is often used in the place of silver because it looks a lot like silver but won't corrode like Ag does. Link to comment Share on other sites More sharing options...
Gilded Posted May 16, 2006 Share Posted May 16, 2006 I happen to own some pure palladium and it indeed is quite silvery and white so I can account for that also. I'd imagine some palladium alloys could look pretty much like gold though. Link to comment Share on other sites More sharing options...
GutZ Posted May 16, 2006 Share Posted May 16, 2006 What about platinum? err I think that electrical conductivity. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now