dragonstar57 Posted August 23, 2010 Posted August 23, 2010 I don't know much about them except what i learned from power labs but i know they use electromagnets to accelerate a projectile. and that because there is no "burn rate" in theory the projectile should be able to reach the speed of light. but as in any experiential technology there must be a problem that is preventing it from being perfected so what is this problem and what are some ways that this could be solved in the future
Mr Skeptic Posted August 23, 2010 Posted August 23, 2010 The problems are thus: 1) They require huge amounts of electrical power, and so are unlikely to be of use in anything other than nuclear powered battleships or stationary defences. 2) The rails wear out too quickly.
dragonstar57 Posted August 24, 2010 Author Posted August 24, 2010 if energy is the problem then it would seem that a tank would have the necessary energy to also be equipped with a rail gun possibly even explosive rail gun rounds could be used
Mr Skeptic Posted August 24, 2010 Posted August 24, 2010 A tank doesn't have a nuclear reactor. Using explosives in the rail gun round would reduce the explosiveness of the round and increase storage problems.
CaptainPanic Posted August 25, 2010 Posted August 25, 2010 I think the first application of rail guns will be to shoot stuff into low orbit. I cannot see military applications anywhere soon... for the reasons mentioned above: military applications need mobile electrical power, and the rails wear too quickly. However, there is plenty of robust bulk material that needs to get into orbit (fuels, water, food, or mechanical parts for maintenance of ships up there)... if packed in the right way, all that can withstand massive G forces, so it can be launched in a simple shell. Cheap, efficient, fast.
dragonstar57 Posted August 29, 2010 Author Posted August 29, 2010 wow every topic I have even visited has a comment by Mr Skeptic and or insane alien and there all good comments. how does one have enough time to comment on everything said on SFN sry i'm off topic but i started the thread so its not as bad
jcarlson Posted August 31, 2010 Posted August 31, 2010 The navy is working on a rail gun atm. This was filmed with an ultra-high speed camera. Remember a rail gun uses no explosive charge for propulsion, the flames following the projectile is air molecules that have turned into plasma from the friction between the bullet and the air caused by the extreme velocity. Limitations are, as has been stated, power generation and durability of the rails.
dragonstar57 Posted August 31, 2010 Author Posted August 31, 2010 (edited) that was allot more impressive than http://www.powerlabs.org/ their rail gun is cool but... Edited August 31, 2010 by cipher510
Leader Bee Posted September 14, 2010 Posted September 14, 2010 The problems are thus: 1) They require huge amounts of electrical power, and so are unlikely to be of use in anything other than nuclear powered battleships or stationary defences. 2) The rails wear out too quickly. I wasn't sure if the projectile had to make contact with the rails or not to fire. If the problem is that the rails wear out too quickly what about the possibility of using a coilgun?
marton Posted September 24, 2010 Posted September 24, 2010 Hello: Hi since long time ago, i haven't post here but I am back. What about a combination: An explosive initial expulsion to overcame the intitial static inertia, then followed by the electromagnetic field applied, this could reduce the energy to move the projectile. One question are the rail guns bullets magnetized? Marton www.engitek.com
dragonstar57 Posted October 25, 2010 Author Posted October 25, 2010 Hello: Hi since long time ago, i haven't post here but I am back. What about a combination: An explosive initial expulsion to overcame the intitial static inertia, then followed by the electromagnetic field applied, this could reduce the energy to move the projectile. One question are the rail guns bullets magnetized? Marton www.engitek.com they already use pressurized gas for this purpose. if they didn't the projectile would become "spot welded" to the barrel
marine10101 Posted February 20, 2011 Posted February 20, 2011 (edited) "I think the first application of rail guns will be to shoot stuff into low orbit. I cannot see military applications anywhere soon... for the reasons mentioned above: military applications need mobile electrical power, and the rails wear too quickly. However, there is plenty of robust bulk material that needs to get into orbit (fuels, water, food, or mechanical parts for maintenance of ships up there)... if packed in the right way, all that can withstand massive G forces, so it can be launched in a simple shell. Cheap, efficient, fast." the US Navy just got a 32 Mega Joule rail gun to mount on a ship and to my knowledge they are looking for a cheap replacement for the Tomahawk cruse missile Edited February 20, 2011 by marine10101
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now