Silencer Posted December 16, 2004 Share Posted December 16, 2004 Is there a way that you can tell how concentrated a solution must be for it to be saturated? For example, suppose I want to make a saturated NaCl solution in water. How do I know the maximum molarity possible and thus how much NaCl to use? Link to comment Share on other sites More sharing options...
jdurg Posted December 16, 2004 Share Posted December 16, 2004 I believe you would look at the Ksp of the salt. From that you can calculate the amount of salt needed to saturate a solution. Link to comment Share on other sites More sharing options...
budullewraagh Posted December 16, 2004 Share Posted December 16, 2004 you can also dissolve a bunch of salt in water and when it precipitates you will find that it is saturated Link to comment Share on other sites More sharing options...
Tetrahedrite Posted December 17, 2004 Share Posted December 17, 2004 Ditto to both of the above. The Ksp however is temperature dependent so you are better off adding excess salt and using the solution in contact with the undissolved salt. Link to comment Share on other sites More sharing options...
jdurg Posted December 17, 2004 Share Posted December 17, 2004 But if you wanted to know the exact mass of salt needed for a solution to be saturated, you'd have to use the Ksp value. But if it doesn't matter what the mass is, then just keep adding salt until it doesn't dissolve. Link to comment Share on other sites More sharing options...
budullewraagh Posted December 17, 2004 Share Posted December 17, 2004 exactly. works a charm Link to comment Share on other sites More sharing options...
Gilded Posted December 17, 2004 Share Posted December 17, 2004 Yeah, that's probably the best way, but I wonder if Silencer wanted to know a way of knowing the amount without exactly having any of the saturating and to-be-saturated compounds. Link to comment Share on other sites More sharing options...
Silencer Posted December 17, 2004 Author Share Posted December 17, 2004 Yeah, I was wondering about the math, but I think that is a chapter in my text book so I will look it up. We might even get to it this semester and then I will be ahead. Link to comment Share on other sites More sharing options...
raivo Posted December 17, 2004 Share Posted December 17, 2004 As much as i know therre is no easy way to compute solubilities. You have to make your own experiments or look for manuals. If anyone knows that those data can be computed someway then i'd like to know more about it. It would be very usefull - so i get rid of some heavy books on my table. Link to comment Share on other sites More sharing options...
jdurg Posted December 17, 2004 Share Posted December 17, 2004 Well, the Ksp of NaCl at 25 degrees Celcius is 37.3. So the equation is Ksp (37.3) = [Na+][Cl-]. Since one mole of NaCl results in a mole of Na+ and Cl- upon dissolving, you can say that 37.3 = x^2 where x = concentration of the salt at saturation. So the square root of 37.3 = 6.11. Therefore, the concentration of NaCl in a saturated solution is 6.11 moles/L, or 58.44 grams per Liter at 25 degrees Celcius. Link to comment Share on other sites More sharing options...
jdurg Posted December 17, 2004 Share Posted December 17, 2004 This can be done for nearly every Ksp value. Since the Ksp is an equillibrium constant at saturation for a dissolved salt. Since the Ksp is calculated from these concentrations at saturation, the concentrations can be determined. If you have a salt that's not binary, it's still easy to calculate. Let's take Na2SO4 for example. (Sadly, I cannot find the Ksp of this salt. It's a pain in the ass if you don't have a CRC Handbook to find Ksp values of soluble salts). So we'll assume the Ksp of Na2SO4 is 40.8. We would write the equation as 40.8 = [Na+]^2[sO4(2-)]. We'll replace the concentration of SO4(2-) with 'x', and the concentration of Na+ with '2x' since the concentration of sodium ions will always be twice that of sulfate ions. We now have 40.8=((2x)^2)(x) = 4x^3 -> 10.2 = x^3. x = concentration of the salt at saturation = 2.17 moles/L. Link to comment Share on other sites More sharing options...
Silencer Posted December 17, 2004 Author Share Posted December 17, 2004 Thank you jdurg! Is there a good site online that allows you to look up various values like these? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now