Externet Posted April 26, 2016 Posted April 26, 2016 Hi. Noticed in some non-residential buildings, that toilets drain the waste brutally fast. Is there any vacuum implementation of some kind in modern/specialized sewer plumbing like in hospitals, hotels... ?
Externet Posted April 29, 2016 Author Posted April 29, 2016 (edited) Silence... obviously no plumbers here... Rethinking; any partial vacuum implemented to the sewer would drain the toilet trap and other traps in the drain pipes. Not a viable way. What if these modern toilets apply full water supply pressure into the jet orifice at the moment of flushing its tank ? That could achieve the fast observed effect. Will search for details. Bring your findings too. Edited... not far from suspicion ----> http://www.flushmate.com/ and jump to 16:40 time stamp ----> Edited April 29, 2016 by Externet
Mordred Posted April 29, 2016 Posted April 29, 2016 There is some vacuum assist toilets. Vaccuusan toilets used on Naval ships is one example. However I seriously doubt they would apply in your scenario above.
Endy0816 Posted April 29, 2016 Posted April 29, 2016 I did plumbing on the sub, but the toilets we had were a simple two valve affair. I can't remember if they used the siphon effect or not at this point. Looks like it may just be based on the supply line pressure differences between commercial and residential. http://home.howstuffworks.com/tankless-toilet2.htm If you can, try and catch the manufacturer. Most are good at providing info about their products.
Phi for All Posted April 29, 2016 Posted April 29, 2016 I have a friend who's wife made him buy a pressure-assisted, quick-flush toilet in their guest bath at home, with the idea of getting rid of the waste FAST. The problem is, it hisses so loudly that it scares the hell out of you when you flush the first time. I've never gotten used to how loud it is, and I don't consider it worth the quicker flush. It might use less water, but it's hard on the nerves.
kaimichel Posted September 20, 2020 Posted September 20, 2020 (edited) Forget about vacuum implementation. Tankless toilets can simplify this issue. Tankless toilets have become popular in recent days. This is not only for their high-tech, compact, and fashionable design but they also come without a tank. Unlike regular toilets, they don’t have water in their tanks and directly connected to the water supply pipes. So, how the water draws into the bowl? Well, small electric pumps are used. As some models allow the water flow to be regulated electronically, they tend to be eco-friendlier. When I was at Urban Assembly New Work Harbor School hostel, I noticed the authority like to use tankless toilets as they are also ideal to fix in tight spots. Note that- that place was also in a non-residential area. Edited September 20, 2020 by kaimichel 1
Charles 3781 Posted September 22, 2020 Posted September 22, 2020 (edited) When you have a bath, you just turn the taps on and the water comes out under mains-pressure to fill up the bath. Couldn't this same principle be applied to flushing a toilet? Edited September 22, 2020 by Charles 3781 Brevity
swansont Posted September 22, 2020 Posted September 22, 2020 The tank ensures you can flush even if pressure/flow is low, or even temporarily nonexistent (still flushes in a situation where the tank drains faster than it fills) Also without electricity, as you don’t need your own pump.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now